Pressing and Washing Instructions for DTF Transfers

🔥 Pressing Instructions:

1. Set Your Heat Press:

  • Temperature: 300–320°F (149–160°C)
  • Pressure: Medium to firm
  • Time: 20-30 seconds

2. Pre-Press the Garment:

  • Press your garment for 5 seconds to remove moisture and wrinkles.

3. Place the Transfer:

  • Position the transfer film design side up on the garment (design facing you).

4. Press the Transfer:

  • Cover with a Teflon or parchment sheet (optional for extra protection).
  • Press for 20-30 seconds.

5. Cool Peel:

  • Let the transfer cool completely before peeling the film off slowly and evenly.

6. Final Press (Recommended):

  • Cover with parchment/Teflon sheet and press again for 20-30 seconds to lock in the design and give it a soft finish.

💧 Washing Instructions:

  • Wait 24–48 hours before washing
  • Wash inside out in cold water
  • Tumble dry low or hang dry
  • Do not bleach or dry clean